Introduction：This equipment is suitable for mixing dry powder and granular materials in industries such as pharmaceuticals, chemicals, food, dyes, feed, pesticides, etc. This mixer has the advantages of simple structure, large feeding amount, small footprint, and convenient discharge.
Read more
Introduction：The two-dimensional mixer is mainly composed of three parts: a rotary drum, a swing frame, and a frame. The drum is mounted on a swing frame, supported by four rollers and axially positioned by two gear wheels. Among the four supporting rollers, two transmission wheels are driven by a rotating power system to rotate the drum. The swing frame is driven by a set of crank swing rod mechanisms, which ···
Read more
Introduction：During the operation of the 3D motion mixer, due to the multi-directional movement of the mixing barrel, various materials are accelerated in flow and diffusion during the mixing process, while avoiding the phenomenon of material density segregation and accumulation caused by centrifugal force in general mixers.
Read more
Introduction：This machine is suitable for mixing two or more dry powder and granular materials in industries such as pharmaceuticals, chemicals, and food. The mixing cylinder of this machine has a special structure, high mixing efficiency, no dead corners, made of stainless steel material, polished inner and outer walls, beautiful appearance, uniform mixing, wide applicability, and can be matched with a forced···
Read more
Introduction：The CH series trough mixer is used to mix powdered or wet materials, ensuring uniform mixing of different proportions of main and auxiliary materials.
Read more
Introduction：This model consists of a container, spiral stirring blades, and transmission components: the spiral blades are generally made into double or triple layers, with the outer layer of spiral collecting materials from both sides to the center, and the inner layer of spiral conveying materials from both sides of the center, forming convective mixing.
Read more
Introduction：This machine is a new type of high-precision mixing equipment, widely used for mixing various powdered materials in industries such as pharmaceuticals, chemicals, and feed. The machine is equipped with a set of motors and cycloidal pinwheel reducers for self rotation. It uses two screws for asymmetric mixing, which allows for a wide range of material mixing, fast mixing speed, and significant weig···
Read more
Introduction：The HJ series double cone mixer saves energy, is easy to operate, has low labor intensity, and high work efficiency. It is suitable for mixing powdered and granular materials in industries such as pharmaceuticals, chemicals, food, and building materials.
Read more
Introduction：Load the materials into a square conical closed mixing bucket, with the symmetrical axis of the hopper forming an angle with the axis of the rotating shaft. Different components of materials move in three-dimensional space in the closed material door, producing strong flipping and diffusion effects, achieving the best mixing effect.
Read more
Introduction：This model consists of four parts: transmission mechanism, horizontal cylinder, plow blade, and flying blade; The material undergoes circumferential turbulence along the cylinder wall under the action of the plow blade. When the material flows through the flying blade, it is scattered by the high-speed rotating flying blade, thus achieving uniform mixing in a short period of time.
Read more
Introduction：The high-speed mixer is suitable for dry powder mixing in industries such as pharmaceuticals, food, chemicals, and electronics. It is particularly suitable for mixing materials with high uniformity requirements and large differences in material density. This machine has the characteristics of compact structure, easy operation, beautiful appearance, small footprint, and good mixing effect.
Read more
Introduction：The gravity free mixer is characterized by strong and efficient mixing, with two stirring devices in the horizontal cylinder rotating at the same speed in reverse. The specially arranged blades on top ensure that the material moves radially, circumferentially, and axially in three directions, forming a composite cycle and achieving uniform mixing in a very short time.
Read more
